Do you know which vacuum cleaner micro switches are there?
The characteristics of the micro switch of the vacuum cleaner
1. Ultra-small, lightweight and high-precision.
2. Ordinary small screws of type 2, m2mm can be used.
3. At the same time, a structure with a reference distance from the forming terminal is adopted, so that it is difficult for soldering tin and repairing flux to penetrate into the inside of the switch.
4. In addition, it has a low-power circuit type (au packet contact) suitable for small volt-ampere loads.
5. Independent terminal, easy to install on the printed board. The switch body is independent with respect to the printing plate of 1.2 ~ 1.6 mm.
6. There are also printed version right corner terminal and left corner terminal series.
7. Comply with RoHS guidelines.
Precautions when using the micro switch of the vacuum cleaner
1. When fixing the switch body, use M2 small screws on the smooth surface with a torque less than or equal to 0.098N m. Also, in order to prevent the screw from loosening again, it is recommended to use a washer at the same time.
2. Please note that in the free state, the action body cannot directly apply force to the button or the rubber machine, and to apply force to the button horizontally when using it.
3. Post-task task settings, based on the o.t. value of 70[%] or more. For switches, do not set the motion to the motion limit position. This does not reduce the life after opening and closing and movement associated with the impact.
4. For hand soldering, please use electrical temperature 320 with temperature adjustment, complete the operation within 3 seconds, and be careful not to apply force to the terminal part during operation.
5.It is recommended to use a low-power circuit type when used under small current and voltage.
The micro switch is a small contact gap and snap action mechanism. It is a contact mechanism that performs switching movement with a specified stroke and a specified force. It is covered on the housing and has a driving lever outside. The contacts of the switch are relatively spaced apart, so they are also called micro switches. Also known as a sensitive switch.
Vacuum cleaner micro switches are often used as limit switches for valves and actuators. A limit switch sends a signal to the higher-level control system when the valve is fully open, fully closed, or reaches a specified position.
The working principle of the micro switch of the vacuum cleaner:
External mechanical forces exert force on the motion spring through transmission components (pins, buttons, levers, wheels, etc.), resulting in instantaneous motion when the motion spring is displaced to a critical point. The moving contact at the end of the moving spring is quickly connected or disconnected from the fixed contact.
After eliminating the force on the transmission parts, the movement spring generates a reverse movement force. When the reverse stroke of the transmission parts reaches the critical point of the movement of the reed, the reverse movement is completed instantly. The contact interval of the micro switch of the vacuum cleaner is small, the action stroke is short, the power is small, and the on-off is fast.
If you need a vacuum cleaner micro switch, you can contact us! We are IBAO, a professional manufacturer of micro switches in China!
We are contributing a better value!On the basis of comprehensive quality management,We continuously improve the quality and efficiency of team work.Strengthen the cooperation with customers and suppliers, and promote each other.Keep improving on the product quality and cost.Offer a better solution and support for customers.
★ Keep Improving
★ Superior Quality
★ Continuous Improvement
★ Pursuit of Excellence
Product Research and Development
IBAO has a team of highly-educated and high professional competence staff.We can complete the development process independently covering research on customer demand,product concept formation, product design, mold design and development,automation equipment design and development and so on .We can also help customer solve the technical issues in production process and quality issues.
Injection Workshop
Total 35 injection machine(20T-150T)
Punching Workshop
Total 105 high-speed precision stamping machine
We are contributing a better value!On the basis of comprehensive quality management,We continuously improve the quality and efficiency of team work.Strengthen the cooperation with customers and suppliers, and promote each other.Keep improving on the product quality and cost.Offer a better solution and support for customers.
★ Keep Improving
★ Superior Quality
★ Continuous Improvement
★ Pursuit of Excellence
Patents
All products are guaranteed to be patented or free from patent disputes.
Production Capacity
There are more than 300 automatic production equipment, which can meet the annual output of 120 million switches and more than 1 billion sets of micro-motor accessories.
Provide Support
Provide technical guidance and technical training support.
R&D Department
The R&D team has 121 people, who can independently complete the comprehensive development process from customer demand research, product concept formation, product design, mold design and development, production automation, etc.
Quality Assurance
All process operations are operated by our company Tongda OA wizard, ERP system, and Moqibao. The whole process needs to be approved and can be held accountable. Automatic production is equipped with CCD inspection, with a quality team of 65 people and more than 20 types of inspection equipment. There are more than 220 units in total, and the shipment needs to be fully inspected by QC and a shipment inspection report will be issued.
Modern Production Chain
advanced automated production workshop, stamping, injection molding workshop, production assembly workshop, silk screen printing workshop, machining workshop, etc.
